Archives of Acoustics, 44, 2, pp. 309–320, 2019
10.24425/aoa.2019.128494

Vibration Analysis of a Carbon Nanotube Reinforced Uniform and Tapered Composite Beams

Ananda BABU ARUMUGAM
Sharda University
India

Vasudevan RAJAMOHAN
Vellore Institute of Technology
India

Naresh BANDARU
Brilliant Institute of Engineering and Technology
India

Edwin SUDHAGAR P.
Vellore Institute of Technology
India

Surajkumar G. KUMBHAR
Rajarambapu Institute of Technology
India

In this study, free and forced vibration responses of carbon nanotube reinforced uniform and tapered composite beams are investigated. The governing differential equations of motion of a carbon nanotube (CNT) reinforced uniform and tapered composite beams are presented in finite element formulation. The validity of the developed formulation is demonstrated by comparing the natural frequencies evaluated using present FEM with those of available in literature. Various parametric studies are also performed to investigate the effect of aspect ratio, percentage of CNT content, ply orientation, and boundary conditions on natural frequencies and mode shapes of a CNT reinforced composite beam. It was observed that the addition of carbon nanotube in fiber reinforced polymer composite (FRP) beam enhance the stiffness of the structure which consequently increase the natural frequencies and alter the mode shapes.
Keywords: carbon nanotubes; uniform and tapered composite beams; finite element formulation; natural frequency
Full Text: PDF

References

Andrews R., Wiesenberger M.C. (2004), Carbon nanotube polymer composites, Current Opinion in Solid State and Materials Science, 1, 31–37.

Bakshi S.R., Batista R.G., Agarwal A. (2009), Quantification of carbon nanotube distribution and property correlation in nanocomposites, Composites: Part A, 40, 1311–1318.

Cleghorn W.L., Tabarrok. B. (1997), Finite element formulation of a tapered Timoshenko beam for free vibration analysis, Journal of Sound and Vibration, 152(3), 461–470.

Dai R.L., Liao W.H. (2009), Fabrication, testing, and modelling of carbon nanotube composites for vibration damping, Journal of Vibration and Acoustic, 131, 1–9.

de Borbon F., Ambrosini D., Curadelli O. (2014), Damping response of composites beams with carbon nanotubes, Composites: Part B, 60, 106–110.

Deepak B.P., Ganguli R., Gopalakrishnan S. (2012), Dynamics of rotating composite beams: A comparative study between CNT reinforced polymer composite beams and laminated composite beams using spectral finite elements, International Journal of Mechanical Sciences, 64, 110–126.

El-Maksoud Abd M.A. (2000), Dynamic analysis and buckling of variable thickness laminated composite beams using conventional and advanced finite element formulations, Master of applied Science Thesis, Department of Mechanical Engineering, Concordia University.

Fidelus J.D., Wiesel E., Gojny F.H., Schulte K., Wagner H.D. (2005), Thermo-mechanical properties of randomly oriented carbon/epoxy nanocomposites, Composites Part A: Applied Science and Manufacturing, 36, 1555–1561.

Gibson R.F., Ayorinde E.O., Wen Y.F. (2007), Vibrations of carbon nanotubes and their composites: a review, Compos Science and Technology, 67, 1–28.

He K., Hoa S.V., Ganesan R. (2000), The study of tapered laminated composite structures: A review, Composites Science and Technology, 60, 2643–2657.

Iijima S. (1999), Helical microtubules of graphitic carbon, Nature, 8, 354–356.

Jakkamputi L.P., Rajamohan V. (2017), Dynamic characterization of CNT-reinforced hybrid polymer composite beam under elevated temperature—an experimental study, Polymer Composites, doi:10.1002/pc.24668.

Khan S.U., Li C.Y., Siddiqui N.A., Kim J.-K. (2011), Vibration damping characteristics of carbon fiber-reinforced composites containing multi-walled carbon nanotubes, Composites Science and Technology, 71, 1486–1494.

Ko F.K. (2004), Nanofiber Technology: Bridging the Gap Between Nano and Macro World, [In:] Nanoengineered Nanofibrous Materials, Guceri S., Gogotsi Y.G., Kuznetsov V. (Eds.), pp. 1–18, Kluwer Academic Publishers, Dordrecht.

Lin R.M., Lu C. (2010), Modelling of interfacial friction damping of carbon nanotube based nanocomposites, Mechanical Systems and Signal Processing, 24, 2996–3012.

Moser K., Lumassegger M. (1988), Increasing the damping of flexural vibration of laminated FPC structures by incorporation of soft intermediate plies with minimum reduction of stiffness, Composite Structures, 10, 321–333.

Qu Y., Long X., Li H., Meng G. (2013), A variational formulation for dynamic analysis of composite laminated beams based on a general higher-order shear deformation theory, Composite. Structures, 102, 175–192.

Ramaratnam A., Jalili N. (2006), Reinforcement of piezoelectric polymers with carbon nanotubes: pathway to next-generation sensors, Journal of Intelligent Material Systems and Structures, 17, 199–208.

Rao S.S. (2011), Mechanical Vibration, 5th Ed., Pearson Education, University of Miami.

Ruoff R.S., Qian D., Liu W.K. (2003), Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurements, Comptes Rendus Physique, 4(9), 993–1008.

Saravanos D.A., Pereira J.M. (1992), Effects of interply damping layers on the dynamic characteristics of composite plates, American Institute of Aeronautics and Astronautics, 30(12), 2906–2913.

Savvas D.N., Papadopoulos V., Papadrakakis M. (2012), The effect of interfacial shear strength on damping behaviour of CNT reinforced composites, International Journal of Solids and Structures, 49, 3823–3837.

Shi D., Feng X., Huang Y.Y., Hwang K., Gao H. (2004), The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composites, Journal of Engineering Materials and Technology, 126, 250–257.

Soutis C. (2005), Carbon fiber reinforced plastics in aircraft construction, Material Science Engineering, 412(1), 171–176.

Tan H., Jiang L.Y., Huang Y., Liu B., Hwang K.C. (2007), The effect of van der Waals-based interface cohesive law on carbon nanotube-reinforced composite materials, Composite Science and Technology, 67, 2941–2946.

Thomas J., Abbas A.H. (1978), Finite element model for dynamic analysis of Timoshenko beams, Journal of Sound and Vibration, 60, 11–20.

Thostenson E.T., Chou T.W. (2002), Aligned Multi-Walled Carbon Nanotube Reinforced Composites: Processing and Mechanical Characterization, Journal of Physics D: Applied Physics, 35, 77–80.

Zabihollah A., Ganesan R. (2007), Vibration analysis of tapered composite beams using a higher-order finite element. Part II: parametric study, Composite Structures, 77, 306–318.




DOI: 10.24425/aoa.2019.128494

Copyright © Polish Academy of Sciences & Institute of Fundamental Technological Research (IPPT PAN)