Archives of Acoustics, 43, 3, pp. 369–384, 2018

Review on Resonator and Muffler Configuration Acoustics

Muhammad Hariz KHAIRUDDIN
Universiti Teknologi MalaysiaKHAIRUDDIN,

Mohd Farid Muhamad SAID
Universiti Teknologi Malaysia

Afiq Aiman DAHLAN

Khairuldean Abdul KADIR

Nowadays, resonators are widely used in automobile, industrial applications, aerospace engineering, and some other fields. One of the unique characteristics of resonators which made them highly convenient is their acoustic capability to attenuate noise without having to use any acoustic absorptive material. The device acts by manipulating the sound waves to create mismatch impedance. Recent studies also suggest that the typical bulk size resonator with narrow frequency bandwidth is not the only option anymore, since there are newly designed resonators that are capable of having wide attenuation bandwidth and are smaller in size. Numerical and experimental measures were executed accordingly with the same purpose to obtain efficient noise attenuation results from varying resonators’ and mufflers’ configuration in terms of quantity, types, and geometry. The aim of this review is to summarize recent developments on resonator study and to try highlighting some noteworthy issues that need to be unraveled by future research. Helmholtz resonator, Quarter wave tube, Herschel-Quincke tube and helicoidal resonator are part of the numerous resonator studies that will be covered in this paper.
Keywords: resonator review; muffler; acoustics
Full Text: PDF
Copyright © Polish Academy of Sciences & Institute of Fundamental Technological Research (IPPT PAN).


Abbad, A. (2016). Numerical Investigations on a Tunable Helmholtz Resonator: Integration of a Passive Polymer Membrane in a Helmholtz Resonator, SAE Technical Paper.

Alonso, J. S., et al. (2013). "Adaptive concepts for Herschel–Quincke waveguides." Journal of vibration and acoustics 135(3): 031016.

Aly, K. and S. Ziada (2016). "Review of Flow-Excited Resonance of Acoustic Trapped Modes in Ducted Shallow Cavities." Journal of Pressure Vessel Technology 138(4): 040803.

Cai, C., et al. (2017). "An extended neck versus a spiral neck of the Helmholtz resonator." Applied Acoustics 115: 74-80.

Cai, C. and C. M. Mak (2016). "Noise control zone for a periodic ducted Helmholtz resonator system." The Journal of the Acoustical Society of America 140(6): EL471-EL477.

Chiu, M.-C. (2010). "Numerical optimization of a three-chamber muffler hybridized with a side inlet and a perforated tube by SA method." Journal of Marine Science and Technology 18(4): 484-495.

Chiu, M.-C. (2014). "Acoustical treatment of multi-tone broadband noise with hybrid side-branched mufflers using a simulated annealing method." Journal of Low Frequency Noise, Vibration and Active Control 33(1): 79-111.

Coulon, J.-M., et al. (2016). "Optimization of concentric array resonators for wide band noise reduction." Applied Acoustics 113: 109-115.

Duan, C. (2008). "Tuned Silencer Using Adaptive Variable Volume Resonator." SAE international journal of passenger cars-electronic and electrical systems 1(2008-01-0896): 296-300.

Erol, H. and C. Meriç (2009). "Application of resonators and a side branch duct with an expansion chamber for broad band noise control." Noise Control Engineering Journal 57(5): 476-492.

Guo, R. and W.-b. Tang (2017). "Transfer matrix methods for sound attenuation in resonators with perforated intruding inlets." Applied Acoustics 116: 14-23.

Herrin, D. W., et al. (2014). "The Proper Use of Plane Wave Models for Muffler Design." SAE International Journal of Passenger Cars-Mechanical Systems 7(2014-01-0016): 927-932.

Hong, Z., et al. (2014). "Suppression of Helmholtz resonance using inside acoustic liner." Journal of Sound and Vibration 333(16): 3585-3597.

Howard, C. Q. and R. A. Craig (2014). "An adaptive quarter-wave tube that uses the sliding-Goertzel algorithm for estimation of phase." Applied Acoustics 78: 92-97.

Howard, C. Q. and R. A. Craig (2014). "Noise reduction using a quarter wave tube with different orifice geometries." Applied Acoustics 76: 180-186.

Huang, L. (2009). "Attenuation of low frequency duct noise by a flute-like silencer." Journal of Sound and Vibration 326(1): 161-176.

Karlsson, M. and R. Glav (2007). The Flow Reversal Resonator, SAE Technical Paper.

Kurdi, M. H., et al. (2014). "Optimal Design of a Helmholtz Resonator With a Flexible End Plate." Journal of vibration and acoustics 136(3): 031004.

Łapka, W. (2014). "Transmission loss and pressure drop of selected range of helicoidal resonators." Vibrations in Physical Systems 26.

Liu, X. G. and C. C. Yin (2011). A Study of the Herschel-Quincke Tube Concept. Advanced Materials Research, Trans Tech Publ.

Munjal, M. (1990). "Advances in the acoustics of flow ducts and mufflers." Sadhana 15(2): 57-72.

Munjal, M. (2013). "Recent advances in muffler acoustics." International Journal of Acoustics and Vibration 18(2): 71-85.

Nudehi, S. S., et al. (2013). "Modeling and experimental investigation of a Helmholtz resonator with a flexible plate." Journal of vibration and acoustics 135(4): 041102.

Ouédraogo, B., et al. (2016). "Broadband noise reduction by circular multi-cavity mufflers operating in multimodal propagation conditions." Applied Acoustics 107: 19-26.

Reddi, C. V. and C. Padmanabhan (2016). "Design relation and end correction formula for multi-orifice Helmholtz resonators with intrusions." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 230(6): 939-947.

Sanada, A. and N. Tanaka (2013). "Extension of the frequency range of resonant sound absorbers using two-degree-of-freedom Helmholtz-based resonators with a flexible panel." Applied Acoustics 74(4): 509-516.

Seo, S.-H., et al. (2016). "Transmission loss of a silencer using resonator arrays at high sound pressure level." Journal of Mechanical Science and Technology 30(2): 653-660.

Shi, X. and C.-M. Mak (2017). "Sound attenuation of a periodic array of micro-perforated tube mufflers." Applied Acoustics 115: 15-22.

Shi, X. and C. M. Mak (2015). "Helmholtz resonator with a spiral neck." Applied Acoustics 99: 68-71.

Tang, S. (2010). "On sound transmission loss across a Helmholtz resonator in a low Mach number flow duct." The Journal of the Acoustical Society of America 127(6): 3519-3525.

Tang, S. (2012). "Narrow sidebranch arrays for low frequency duct noise control." The Journal of the Acoustical Society of America 132(5): 3086-3097.

Tang, S., et al. (2012). "Experimental investigation of the sound absorption performance of compartmented Helmholtz resonators." Applied Acoustics 73(9): 969-976.

Tao, Z. and A. Seybert (2003). A review of current techniques for measuring muffler transmission loss, SAE Technical Paper.

Wang, C. and L. Huang (2012). "Investigation of a broadband duct noise control system inspired by the middle ear mechanism." Mechanical Systems and Signal Processing 31: 284-297.

Wang, X. and C.-M. Mak (2012). "Wave propagation in a duct with a periodic Helmholtz resonators array." The Journal of the Acoustical Society of America 131(2): 1172-1182.

Wang, X. and C.-M. Mak (2014). "Disorder in a periodic Helmholtz resonators array." Applied Acoustics 82: 1-5.

Wang, X., et al. (2016). "Sound transmission in a duct with a side-branch tube array mounted periodically." The Journal of the Acoustical Society of America 139(6): EL202-EL208.

Wu, C., et al. (2016). "Modeling and experimental verification of a new muffler based on the theory of quarter-wavelength tube and the Helmholtz muffler." SpringerPlus 5(1): 1366.

Xu, M., et al. (2010). "Dual Helmholtz resonator." Applied Acoustics 71(9): 822-829.

Yang, D., et al. (2014). "The impact of the neck material on the sound absorption performance of Helmholtz resonators." Journal of Sound and Vibration 333(25): 6843-6857.

Yu, H. and S. Tang (2017). "Low frequency interactions between coupled narrow sidebranch arrays and the resulted sound transmission losses." Applied Acoustics 117: 51-60.

Zhao, D. (2012). "Transmission loss analysis of a parallel-coupled Helmholtz resonator network." AIAA journal 50(6): 1339-1346.

DOI: 10.24425/123909