Structural Parametric Study of a Piezoelectric Energy Harvester for a Specific Excitation Frequency of an Electric Motor, Considering Fatigue Life

Downloads

Authors

  • Ping YANG School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia; College of Intelligent Manufacturing and Automobile, Chongqing Technology and Business College, China, Malaysia
  • Nabil MOHAMAD USAMAH School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Malaysia
  • Abdullah Aziz SAAD School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia
  • Ahmad Zhafran AHMAD MAZLAN School of Mechanical Engineering, Engineering Campus, Universiti Sains Malaysia, Malaysia ORCID ID 0000-0003-1399-4481

Abstract

Over the past decade, extensive research has been conducted in the field of piezoelectric energy harvesting, which drives advancements in novel designs and techniques. In this study, the vibration of an electric motor is characterized, and a piezoelectric energy harvester (PEH) beam with a natural frequency of 50 Hz is designed and fabricated. Then, the electromechanical characteristics of the PEH are simulated and tested through both finite element simulation and experiment. The validated simulation model can accurately predict the vibration characteristics of the PEH, which can be utilized for design improvements. Based on this beam structure, three sets of PEHs with different sizes are designed. A study of the output voltage and fatigue life of these different PEH sizes is conducted, and the relationship between the electromechanical coupling effect and its varying values is discussed. Based on the results, design schemes 1∼6 demonstrate advantages in terms of output voltage efficiency and fatigue strength, making them suitable for various environments and application purposes. This study establishes an efficient method for analyzing the structural parametric performance of piezoelectric cantilever beams, which paves the way for future research on fatigue-based structural design guidelines for PEH in electric motors.

Keywords:

piezoelectric energy harvester (PEH), fatigue, output voltage, vibration

References

1. Abdelkefi A., Barsallo N., Tang L., Yang Y., Hajj M.R. (2014), Modeling, validation, and performance of low-frequency piezoelectric energy harvesters, Journal of Intelligent Material Systems and Structures, 25(12): 1429–1444, https://doi.org/10.1177/1045389X13507638.

2. Abdul Satar M.H., Murad A.F., Ahmad Mazlan A.Z. (2022), Characterization of piezoelectric patch material with hysteresis, saturation, creep, and vibration nonlinearity effects and its application to the active vibration suppression for cantilever beam, Journal of Vibration and Control, 28(3–4): 476–489, https://doi.org/10.1177/1077546320980571.

3. Augustyn E., Kozień M.S., Prącik M. (2014), FEM analysis of active reduction of torsional vibrations of clamped-free beam by piezoelectric elements for separated modes, Archives of Acoustics, 39(4): 639–644, https://doi.org/10.2478/aoa-2014-0069.

4. Avvari P.V., Yang Y., Soh C.K. (2017), Long-term fatigue behavior of a cantilever piezoelectric energy harvester, Journal of Intelligent Material Systems and Structures, 28(9): 1188–1210, https://doi.org/10.1177/1045389X16667552.

5. Bao B., Wang Q., Wu N., Zhou S. (2021), Handheld piezoelectric energy harvesting structure: Design, dynamic analysis, and experimental validation, Measurement, 174: 109011, https://doi.org/10.1016/j.measurement.2021.109011.

6. Chen C., Sharafi A., Sun J.Q. (2020), A high density piezoelectric energy harvesting device from highway traffic – Design analysis and laboratory validation, Applied Energy, 269: 115073, https://doi.org/10.1016/j.apenergy.2020.115073.

7. Feng Y., Liu W., Gao M., Chen H., Lu Q. (2023), Analysis of electromechanical response and fatigue life of piezoelectric cantilever beam [in Chinese], Failure Analysis and Prevention, 18(3): 184–190, http://doi.org/10.3969/j.issn.1673-6214.2023.03.007.

8. Gaomeng (n.d.), Shanghai GOM Testing & Technical Co., Ltd., https://www.gaomengce.com. (access: 1.05.2024).

9. Li T., Lee P.S. (2022), Piezoelectric energy harvesting technology: From materials, structures, to applications, Small Structures, 3(3): 2100128, https://doi.org/10.1002/sstr.202100128.

10. Lu Q. (2018), Structure design and electro-mechanical performance analysis of vibration piezoelectric composite energy harvester, Ph.D. Thesis, Harbin Institute of Technology.

11. Niasar E.H.A., Dahmardeh M., Googarchin H.S. (2020), Optimization of a piezoelectric energy harvester considering electrical fatigue, Journal of Intelligent Material Systems and Structures, 31(12): 1443–1454, https://doi.org/10.1177/1045389X20923086.

12. Panda S. et al. (2022), Piezoelectric energy harvesting systems for biomedical applications, Nano Energy, 100: 107514, https://doi.org/10.1016/j.nanoen.2022.107514.

13. Rafique S., Bonello P. (2010), Experimental validation of a distributed parameter piezoelectric bimorph cantilever energy harvester, Smart Materials and Structures, 19(9): 094008, https://doi.org/10.1088/0964-1726/19/9/094008.

14. Roundy S. et al. (2005), Improving power output for vibration-based energy scavengers, IEEE Pervasive Computing, 4(1): 28–36, https://doi.org/10.1109/MPRV.2005.14.

15. Salazar R., Larkin K., Abdelkefi A. (2021), Piezoelectric property degradation and cracking impacts on the lifetime performance of energy harvesters, Mechanical Systems and Signal Processing, 156: 107697, https://doi.org/10.1016/j.ymssp.2021.107697.

16. Sezer N., Koc M. (2021), A comprehensive review on the state-of-the-art of piezoelectric energy harvesting, Nano Energy, 80: 105567, https://doi.org/10.1016/j.nanoen.2020.105567.

17. Shi Y., Hallett S.R., Zhu M. (2017), Energy harvesting behaviour for aircraft composites structures using macro-fibre composite: Part I – Integration and experiment, Composite Structures, 160: 1279–1286, https://doi.org/10.1016/j.compstruct.2016.11.037.

18. Wang J., Qin X., Liu Z., Ding G., Cai G. (2021), Experimental study on fatigue degradation of piezoelectric energy harvesters under equivalent traffic load conditions, International Journal of Fatigue, 150: 106320, https://doi.org/10.1016/j.ijfatigue.2021.106320.

19. Wang S.L., Song J., Zhao X.Y. (2019), Research on energy recovery device of electric vehicle seat based on piezoelectric effect, [in:] 2019 13th Symposium on Piezoelectrcity, Acoustic Waves and Device Applications (SPAWDA), https://doi.org/10.1109/SPAWDA.2019.8681810.

20. Wu X. (2013), The fatigue analysis and experimental research of piezoelectric pump with single chip vibrator, Master Thesis, University of Jilin.

21. Zhang M., Meng Q., Wang H. (2014), Fatigue analysis for cantilever piezoelectric vibration energy harvester.

22. Zhang Q., Liu Z., Jiang X., Peng Y., Zhu C., Li Z. (2022), Experimental investigation on performance improvement of cantilever piezoelectric energy harvesters via escapement mechanism from extremely low-frequency excitations, Sustainable Energy Technologies and Assessments, 53(Part B): 102591, https://doi.org/10.1016/j.seta.2022.102591.

23. Zhu M., Worthington E., Tiwari A. (2010), Design study of piezoelectric energy-harvesting devices for generation of higher electrical power using a coupled piezoelectric-circuit finite element method, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 57(2): 427–437, https://doi.org/10.1109/TUFFC.2010.1423.