Application of Acoustic Metamaterials in the Design of Muffling Unit of Internal Combustion Engine

Downloads

Authors

  • Tianshuo Li North China University of Science and Technology, China
  • Lei Zheng North China University of Science and Technology, China
  • Zhengyang Bi North China University of Science and Technology, China
  • Hongchao Ji North China University of Science and Technology, China

Abstract

Aiming at the problems of large volume, high exhaust resistance and difficulty in suppressing noise in the 500 Hz to 100 Hz frequency band of traditional internal combustion engine exhaust mufflers, a noise reduction unit design based on acoustic metamaterials is proposed. Based on the equivalent medium theory, an acoustic model with a ring structure and multi-region variable refractive index was established. Phase control is achieved by helically winding the acoustic channel to change the refractive index, and the basic dimensions of the acoustic metamaterial muffling unit are calculated. The sound field distribution, transmission loss and flow field characteristics of the muffling unit are simulated and analyzed. This structure utilizes a multi-layer acoustic channel structure, effectively alleviating the problem of insufficient low-frequency noise elimination caused by the asymmetry of Fano interference. It achieved a transmission loss of over 10 dB within 85 % of the 500 Hz to 1000 Hz frequency band, and still maintained excellent noise reduction performance under high-frequency conditions through multi-level phase control. By connecting multiple units in series, a transmission loss of 10 dB can be achieved within 85 % of the 500 Hz to 1000 Hz frequency band. The exhaust flow field of the muffling unit was simulated and analyzed. Whether used alone or in series with the traditional muffling structure, the exhaust resistance remained within the range of 360 Pa to 370 Pa. Experimental tests show that when the metamaterial muffler unit is used in combination with the traditional muffler, it effectively achieves targeted noise elimination in the 500 Hz to 1000 Hz frequency band, and also demonstrates clear noise reduction capabilities in higher frequency ranges. The high noise suppression characteristics, high gas passage characteristics and compact volume characteristics of this structure provide more potential analysis methods and design schemes for the research and development of internal combustion engine mufflers and noise reduction accessories.

Keywords:

acoustic metamaterials, muffler, transmission loss, exhausting resistance

References


  1. Araujo E.S., Pestana R.C. (2024), A numerical scheme based on the Taylor expansion and Lie product formula for the second-order acoustic wave equation and its application in seismic migration, Geophysical Prospecting, 72(5): 1745–1763, https://doi.org/10.1111/1365-2478.13481

  2. Bai C., Wu F., Wang J., Jiang J. (2023), A broadband low-frequency muffler based on neural network method and Helmholtz resonator with helical neck, Journal of Vibration and Control, 29(17–18): 3942–3951, https://doi.org/10.1177/10775463221107197

  3. Chen N. et al. (2024), Research on prediction of yellow flesh peach firmness using a novel acoustic real-time detection device and Vis/NIR technology, LWT, 209: 116772, https://doi.org/10.1016/J.LWT.2024.116772

  4. Chen Z., Ji Z., Huang H. (2020), Acoustic impedance of perforated plates in the presence of fully developed grazing flow, Journal of Sound and Vibration, 485: 115547, https://doi.org/10.1016/j.jsv.2020.115547

  5. Dalla Nora M., Lanzanova T.D.M., Zhao H. (2016), Effects of valve timing, valve lift and exhaust backpressure on performance and gas exchanging of a two-stroke GDI engine with overhead valves, Energy Conversion and Management, 123: 71–83, https://doi.org/10.1016/j.enconman.2016.05.059

  6. Fang N. et al. (2006), Ultrasonic metamaterials with negative modulus, Nature Materials, 5(6): 452–456, https://doi.org/10.1038/nmat1644

  7. Ghaffarivardavagh R., Nikolajczyk J., Anderson S., Zhang X. (2019), Ultra-open acoustic metamaterial muffler based on Fano-like interference, Physical Review B, 99(2): 024302, https://doi.org/10.1103/PhysRevB.99.024302

  8. Guo J., Fang Y., Qu R., Zhang X. (2023), Development and progress in acoustic phase-gradient metamaterials for wavefront modulation, Materials Today, 66: 321–338, https://doi.org/10.1016/j.mattod.2023.04.004

  9. Jiang T., Han Q., Li C. (2023), Topologically tunable local-resonant origami metamaterials for wave transmission and impact mitigation, Journal of Sound and Vibration, 548: 117548, https://doi.org/10.1016/j.jsv.2022.117548

  10. Kheybari M., Ebrahimi-Nejad S. (2019), Locally resonant stop band acoustic metamaterial muffler with tuned resonance frequency range, Materials Research Express, 6(2): 025802, https://doi.org/10.1088/2053-1591/aaed4b

  11. Khodabakhsh S., Movahhedy M.R., Mohammadi K. (2025), A Helmholtz resonator based on spiral neck acoustic metamaterial for noise reduction, Applied Acoustics, 240: 110957, https://doi.org/10.1016/j.apacoust.2025.110957

  12. Kumar S., Lee H.P. (2020), Recent advances in acoustic metamaterials for simultaneous sound attenuation and air ventilation performances, Crystals, 10(8): 686, https://doi.org/10.3390/cryst10080686

  13. Lee J.K., Oh K.S., Lee J.W. (2020), Methods for evaluating in-duct noise attenuation performance in a muffler design problem, Journal of Sound and Vibration, 464: 114982, https://doi.org/10.1016/j.jsv.2019.114982

  14. Li L., Diao Y., Wu H., Jiang W. (2022), Thickness-designable acoustic metamaterial for passive phased arrays, Applied Acoustics, 198: 108942, https://doi.org/10.1016/j.apacoust.2022.108942

  15. Li P., Yao S., Zhou X., Huang G., Hu G. (2014), Effective medium theory of thin-plate acoustic metamaterials, The Journal of the Acoustical Society of America, 135(4): 1844–1852, https://doi.org/10.1121/1.4868400

  16. Li S., Lan Y., Hong L. (2024), A method to analyze the radiation characteristics of a liquid column resonance transducer based on fluid motion, The Journal of the Acoustical Society of America, 155(1): 252–261, https://doi.org/10.1121/10.0024339

  17. Liao D., Cao H., Li S., Cheng W., Yan X., An C. (2024), Study on the control of flow field by resonance acoustic mixing technology for purification of high performance spherical HATO crystals, Separation and Purification Technology, 339: 126688, https://doi.org/10.1016/j.seppur.2024.126688

  18. Lin D.K. et al. (2024), An acoustic impedance design method for tubular structures with broadband sound insulations and efficient air ventilation, Applied Acoustics, 220: 109983, https://doi.org/10.1016/j.apacoust.2024.109983

  19. Liu M., Li P., Du Q., Peng P. (2019), Reflected wavefront manipulation by acoustic metasurfaces with anisotropic local resonant units, EPL, 125(5): 54004, https://doi.org/10.1209/0295-5075/125/54004

  20. Liu Y. et al. (2020), Three-dimensional fractal structure with double negative and density-near-zero properties ona subwavelength scale, Materials & Design, 188: 108470, https://doi.org/10.1016/j.matdes.2020.108470

  21. Lu T., Li Z., Zhang Y. (2025), Broadband low-transmission study of ventilation metasurfaces based on Archimedean spirals, Applied Acoustics, 228: 110335, https://doi.org/10.1016/j.apacoust.2024.110335

  22. Martos F.J., Soriano J.A., Braic A., Fernandez-Yanez P., Armas O. (2023), A CFD modelling approach for the operation analysis of an exhaust backpressure valve used in a Euro 6 Diesel engine, Energies, 16(10): 4112, https://doi.org/10.3390/en16104112

  23. Mohamad B., Karoly J., Zelentsov A., Amroune S. (2021), Investigation of perforated tube configuration effect on the performance of exhaust mufflers with mean flow based on three-dimensional analysis, Archives of Acoustics, 46(3): 561–566, https://doi.org/10.24425/aoa.2021.138148

  24. Naify C.J., Chang C.M., McKnight G., Nutt S.R. (2012), Scaling of membrane-type locally resonant acoustic metamaterial arrays, The Journal of the Acoustical Society of America, 132(4): 2784–2792, https://doi.org/10.1121/1.4744941

  25. Narayan S., Kaisan U.M., Abubakar S. (2021), A review of vibro-acoustic techniques for control of combustion engine noise, Journal of Applied Engineering Science, 19(4): 880–885, https://doi.org/10.5937/JAES0-29675

  26. Orazbayev B., Fleuly R. (2020), Far-field subwavelength acoustic imaging by deep learning, Physical Review X, 10(3): 031029, https://doi.org/10.1103/PhysRevX.10.031029

  27. Shaikh S. et al. (2024), Acoustic propagation and transmission loss analysis in shallow water of Northern Arabian Sea, Journal of Marine Science and Engineering, 12(12): 2256–2256, https://doi.org/10.3390/jmse12122256

  28. Su H., Wu P., Xue J., Zhang Y., Zhang H. (2020), Analysis of flow field characteristics and structure optimization of the split-stream rushing muffler for diesel engine, Noise Control Engineering Journal, 68(1): 101–111, https://doi.org/10.3397/1/37688

  29. Sun M., Fang X., Mao D., Wang X., Li Y. (2020), Broadband acoustic ventilation barriers, Physical Review Applied, 13(4): 044028, https://doi.org/10.1103/PhysRevApplied.13.044028

  30. Wan C. et al. (2023), A low-complexity multi-channel active noise control system using local secondary path estimation and clustered control strategy for vehicle interior engine noise, Mechanical Systems and Signal Processing, 204: 110786, https://doi.org/10.1016/j.ymssp.2023.110786

  31. Wang C., Lu Z., Zhang K. (2012), Small-hole arrays of ceramic material manufactured by micro powder injection molding, The International Journal of Advanced Manufacturing Technology, 59(9–12): 969–976, https://doi.org/10.1007/s00170-011-3570-5

  32. Wang C., Zhao H., Wang Y., Zhong J., Yu D., Wen J. (2024), Topology optimization of chiral metamaterials with application to underwater sound insulation, Applied Mathematics and Mechanics, 45(7): 1119–1138, https://doi.org/10.1007/s10483-024-3162-8

  33. Xiao D.W., Cheng J.F., Zhang J.Z. (2013), Blind DOA estimation based on single acoustic vector hydrophone, Advanced Materials Research, 2428(706–708): 678–681, https://doi.org/10.4028/www.scientific.net/AMR.706-708.678

  34. Xu C., Guo H., Chen Y., Dong X., Ye H., Wang Y. (2021), Study on broadband low-frequency sound insulation of multi-channel resonator acoustic metamaterials, AIP Advances, 11(4): 045321, https://doi.org/10.1063/5.0047416

  35. Xu Z., Fang Y., Wang Z. (2025), Enhanced fano-type broadband acoustic ventilated muffler with arbitrary geometrical configurations, Frontiers in Physics, 13: 1586858, https://doi.org/10.3389/fphy.2025.1586858

  36. Yang M., Ma G., Yang Z., Sheng P. (2013), Coupled membranes with doubly negative mass density and bulk modulus, Physical Review Letters, 110(13): 134301, https://doi.org/10.1103/PhysRevLett.110.134301

  37. Yang M., Ma G., Wu Y., Yang Z., Sheng P. (2014), Homogenization scheme for acoustic metamaterials, Physical Review B, 89(6): 064309, https://doi.org/10.1103/PhysRevB.89.064309

  38. Ye Y.-R., Wang X.-P., Chen T.-N., Chen Y.-Y. (2020), Step-by-step structural design methods for adjustable low-frequency sound insulation based on infinite plate-type acoustic metamaterial panel, Modern Physics Letters B, 34(21): 6–18, https://doi.org/10.1142/S0217984920502206

  39. Zeng H.-C., Luo C.-R., Chen H.-J., Zhai S.-L., Ding C.-L., Zhao X.-P. (2013), Flute-model acoustic metamaterials with simultaneously negative bulk modulus and mass density, Solid State Communications, 173: 14–18, https://doi.org/10.1016/j.ssc.2013.08.017

  40. Zhang Y., Wu P., Ma Y., Su H., Xue J. (2018), Analysis on acoustic performance and flow field in the split-stream rushing muffler unit, Journal of Sound & Vibration, 430: 185–195, https://doi.org/10.1016/j.jsv.2018.04.025

  41. Zhang X., Zhao C., Wang P., Chen R. (2024), Combined acoustic metamaterial design based on multi-channel Fano resonance effect, Journal of Applied Physics, 136(1): 013105, https://doi.org/10.1063/5.0211050